| POWER |
16hp (12 kW) Vanguard V twin cylinder, air cooled, gasoline Cast iron sleeves, 29.3 cu. In. displacement, electronic ignition Full pressure lubrication with oil filter Engine mounted air cleaner and remote mounted 3 phase Donaldson air intake filtration |
| CONFIGURATION |
3-wheel tricycle configuration, 9" (23 cm) ground clearance |
| DRIVE |
Direct multi v-belt drive (with manual clutch for easy cold weather starting) Hydrostatic variable displacement pump to two hydraulic drive motors on rear wheels (Model 42-001D 2-wheel drive) or to two hydraulic drive motors on rear wheels and one hydraulic motor on front wheel (Model 42-000F).
Series-Parallel traction drive
to all 3 wheels. O-ring face seal hydraulic fittings. Hydraulic oil system cooler with engine driven air flow. |
| SPEED |
0-12 mph
(0-20 kph) Both 2-Wheel and 3-Wheel Drive Units |
| BRAKING |
Dynamic breaking through the hydrostatic transmission Hand operated, disc type park/emergency brake |
| MAIN FRAME |
Heavy gauge square steel tubing, hydraulically formed, electrically welded. Rear engine placement. |
| TIRES/WHEELS |
Purchasers choice of (3) 22 - 1100 x 10 knobbed sand tires, -or- (3) 23 -10.50 x 12 turf tires |
| STEERING |
Manual front wheel steering, 15" (38 cm) diameter automotive type, adjustable tilt steering wheel |
| CONTROLS |
Foot pedal for forward and rear operation of hydraulic system "Pro-Pedal" system connects engine throttle to hydraulic demand (Engine speed increases as hydraulic system demand increases)
"Speed Boss" pre-set speed control system on hydrostatic transmission. Hydraulic engage/disengage levers control rear mounted and center mounted implements. |
| SEAT |
Deluxe padded, vinyl covered seat, 1 piece molded, high back support, adjustable operator position |
| ELECTRICAL |
12 volt battery (280 cca); 12 volt electric starter, side mounted Ignition switch, operator presence switch in seat. |
| SOUND LEVEL |
87dB(A) under normal operating conditions |
| DIMENSIONS |
64 in (162 cm) - 57 in (145 cm) - 47 in (119 cm) |
| WEIGHT |
950 lbs (432 kg) |
| LIQUID CAPACITIES |
Hydraulic system oil: 5 gallons (19 liter) in high density polyethylene tank Gasoline (unleaded): 5 gallons (19 liter) in high density polyethylene tank |
| SAFETY & CONFORMANCE |
Complies with all applicable ANSI, OSHA, and European Machinery Directive standards Operator presence switch in seat for engine start |
| OPTIONS |
42-315 Front/Rear light kit |
| IMPLEMENTS |
Over 20 efficient and effective implements for constructing and maintaining sand bunkers and other areas on the golf course. Please see chart below. |
| MODEL NO. |
DESCRIPTION |
WEIGHT (lbs) |
| 13-298Q |
Fan Rake for Sand Traps |
36 |
| 13-319 |
Fan Rake Add On for 13-438 Rake Assembly |
20 |
| 13-438Q |
Sand Trap Rake Assembly |
66 |
| 13-684 |
Brush Attachment for all rakes except 42-130, 42-026 |
20 |
| 13-740 |
Brush Attachment for 42-130, 42-026 only |
20 |
| 42-026Q |
84" (213 cm) Stainless Steel Tournament Rake |
85 |
| 42-128Q |
72" (189 cm) Stainless Steel Tournament Rake |
75 |
| 42-130Q |
84" (213 cm) Mild Steel Tournament Rake |
85 |
| 42-132Q |
72" (189 cm) Mild Steel Tournament Rake |
75 |
| 42-392Q |
84" (213 cm) Multi Brush Rake |
100 |
| 42-391Q |
72" (189 cm) Multi Brush Rake |
90 |