Home > Golf Course Maintenance > Dedicated Spray Vehicles > Spray Star 1000

Spray Star 1000

Spray Star 1000 "Floats" over greens, tees and special turf. Highly accurate controls deliver the precise application of liquid chemicals to greens and fine turf. Your first choice for accuracy, safety and ecology.

  • Lightweight on the turf, approximately 8 psi (.6 bar) ground pressure, protectsyour fine turf.

  • 110 gallon (415 l.) Smithco “Perfect Solution” elliptical polyethylene tank.

  • Simple and reliable hydrostatic drive provides infinitely variable speed

  • 25 hp (19 kW) twin-cylinder gasoline engine

  • Hydraulic Power Steering offers extreme maneuverability around the tightest greens, tees, bunkers and other areas requiring spray application.

  • Positive ground speed control system assures even spray application.

  • Extremely high volume solid stainless steel centrifugal pump running at constant speed, provides the highest application rates plus consistently high agitation volume through the Smithco Quad Jet agitation system. Pump equipped with low volume warning horn and automatic air bleed.

  • Perfect application rates through a choice of 3 spray control systems (Raven SCS440 computerized spray control; Standard electrical boom and pressure control; Simple manual boom and pressure control.

  • Safety for the operator, environment and players who play your course. Certified ROPS w/ seat belts and (optional) Smithco Safe-Fill System.

Download: Technical Specifications PDF Document          

SPRAY STAR 1000 SPECIFICATIONS
 
 
MODELS 1002C  Electric Spray Control System
1008C  Computer Spray Control System w/ GPS
1010C  Manual Spray Control System
POWER 25HP (19 kW) twin cylinder OHV gasoline engine, 12 volt electronic ignition, full pressure lubrication with oil filter.
CONFIGURATION 4 wheel, mid-mount engine, rear mounted sprayer component
DRIVE Hydrostatic variable speed pump, flange mounted to engine, direct drive via splined shaft. Hydraulic power to two rear wheel drive motors. Entire hydraulic system Parker Certified Leak Resistant.
SPEED Infinitely variable from 0-12 mph (0-20 kph)
BRAKING Dynamic breaking through the hydrostatic transmission
 Hand operated, disc type park/emergency brake
BATTERY Automotive type 24F, 12 volt, 900 CCA minimum
LIGHTS Equipped with pair of headlights. Rocker switch operated.
CONSTRUCTION Heavy gauge steel tubing, hydraulically formed, electrically welded.
TIRES/WHEELS Front: (2) 20-1000 x 10 Ribbed
Rear: (2) 24-1200 x 12Multi-Trac
STEERING Hydraulic power steering with orbital motor.
Automotive 15 in (38 cm) steering wheel with tilt adjustment.
18 ft (5.5 m) Outside turning circle.
INSTRUMENTATION Hour Meter, Speedometer, Oil Light, Pump On, Low Pressure Alarm.
PRIME MOVER CONTROLS Dual Pedal Hydraulic Actuation (1 forward, 1 reverse)
Hand operated throttle control
GROUND SPEED CONTROL Mechanically actuated Smithco "Speed Boss" Ground Speed Control Device to maintain constant ground speed
Fixed position engine hand operated throttle
SEAT Deluxe seat, padded, vinyl covered 1 piece molded, 1/2 back support, Adjustable operator position
ELECTRICAL 12 volt battery (280 cca), 24 amps, operator presence switch in seat.
SOUND LEVEL 88dB(A) under normal operating conditions
DIMENSIONS Length: 104" (264cm) - Width: 70" (178 cm) - Height: 77" (196 cm):
Wheel Base 53" (135 cm)
Width with Booms Open:  180" (457 cm)
Height with Booms Folded: 110" (279 cm)
WEIGHT 1283 lbs (582 kg) dry
2200 lbs (998 kg) loaded
LIQUID CAPACITIES Fuel (unleaded): 5 gallons (19 liters) in high density polyethylene tank
Hydraulic System Oil : 5 gallons (19 liters) in high density polyethylene tank
SAFETY & CONFORMANCE Operator presence switch in seat for engine start
Complies with all applicable ANSI, OSHA, and European Machinery Directive standards
Certified ROPS with seat belts.
SPRAY COMPONENT
TANK 110 gallon (416 liter), elliptical shape, cross-linked polyethylene construction with UV inhibitors. 16" (41 cm) hinged lid and fill well with built-in locking device and nylon strainer basket in fill well Positive feed suction sump
FILTRATION Downstream spray system protected by nylon reinforced 50 mesh stainless steel strainer
AGITATION Smithco "Quadra-Jet" agitator with four venturi volume boosters
PUMP Electromagnetic clutch with toggle switch at operator position
10-70 gallons per minute (38-265 lpm) 10-80 psi (0.7-7 bar) High volume centrifugal type with silicon-carbide seal All stainless steel body, shaft and plugs Built in low pressure warning horn to alert operator to low spray liquid level Built in automatic air bleed system for self re-priming during operation with low liquid levels Belt drive from prime mover engine
PERFORMANCE Spray performance
  • Application Rates: 20-220 gallons per acre
  • 0.5-5 gallon per 1,000 sq. Ft.
  • 180-2050 liters per hectare
  • Production rate 6.4 acres/hour @ 3.5 mph (5.6 kph)
  • Up to 75 acres per day
SPRAYER CONTROL
Model 1002C Raven 203 Electric Controller;
  • Master on/off Toggle Switch
  • 3 Individual Boom Control Toggle Switches
  • Spring loaded remote pressure adjustment switch to control motorized   butterfly valve,
  • Oil-Filled Pressure Gauge,
Model 1008 Raven SCS 440 Based Electronic Spray Control System
  • Precise delivery of pre-selected application rate
  • 3 Individual Boom Control toggle switches
  • Record of material applied and area covered
  • Foot switch for booms
  • O-ring seal threadless spray system
Model 1010 Manual type
  • 3 section ABS ball valve turns individual boom sections on/off, agitation on/off
  • Manual Screw type Pressure Adjustment, with pressure gauge
BOOMS 10-160 15 ft(4.5 m) stainless steel boom with 9 nozzles. Manual operation. Folds vertically and forward for transport. Hinges brake away and return to position automatically
17-525 18.5ft (5.5m) 11-triple nozzle triangular structure boom, 12 volt powered outer section fold/ deploy.
17-550  15ft (4.5 m) 9-triple nozzle triangular structure boom, 12 volt powered outer section fold/deploy.
OPTIONS & ACCESSORIES 16-906 12 Volt electric lift for boom (dealer/user installed)
10-350 Foam Marker: Electric Operation, Manual Control
16-129 Hose Reel: 200 ft. (61 m.) Capacity, Manual or electric rewind (Requires 10-107 Mounting Kit) 10-106 Clear Water Wash Tank.
10-366 Chemical Cleanload Safe Fill System (1002 and 1008 ONLY)

10-366 Smithco “Safe-Fill System”

The Smithco Safe Fill System is a self-contained eduction system that allows the operator to mix liquid and dry chemicals safely and quickly.

  • 316 Stainless steel venturi provides highest eduction rate and durability against all chemicals.

  • Safety - All crop protection chemistry is mixed at ground level. Cleanload eliminates the need for operators to climb on and around machines while handling expensive and dangerous chemicals. Operator exposure to slips, trips, and falls is reduced. Chemical spill potential is reduced, minimizing operator and environmental exposure.

  • Optional suction lance allows the operator to educt bulk liquid and dry chemicals (wettable powders, dry flowables and water-dispersible granules) from large containers without secondary handling.

  • Robust tank and bottle rinse nozzles designed to wash Cleanload hopper and triple rinse chemical containers of residue.