Home > Golf Course Maintenance > Dedicated Spray Vehicles > Spray Star 1600P

Spray Star 1600P

First choice for precision, safety and ecology

The Smithco Spray Star 1600 series dedicated spray vehicles are light, maneuverable and productive. Only 9 psi on the turf prevents damage to important playing areas. Easy, all hydraulic, power steering assures maneuverability for even small greens and tees. These sprayers are productive enough to spray an entire course or professionally maintained turf grass sites.

The 1600 is powered by a mechanical drive system to the rear wheels and a 20 hp (15 kw) twin-cylinder gasoline engine. The 1600 controls ground speed precisely using a hand- and foot-operated ground speed control system, meaning increased application accuracy.

Download: Technical Specifications PDF Document         

SPRAY STAR 1600P SPECIFICATION
(Model 1602, 1604, 1610)
PRIME MOVER (Specifications common to all models)
PERFORMANCE Maximum Payload: 1,800 Lbs. (820 kg) Speed Range: 1st Gear: 1-3 mph (1.5-5 kph), 2nd Gear: 2-6 mph (3-10 kph), 3rd Gear: 4-10 mph (6-16 kph)
POWER 20 hp (15 kw) Two cylinder gasoline engine Air Cooled, 25 amp alternator; 12 volt electric system, electronic ignition, dual element air cleaner, closed breathers system, full pressure oil lubrication system, oil filter
DRIVE Three speed mechanical gear drive + reverse Spicer-Dana rear axle
DRIVE CONTROLS Foot throttle Auxiliary hand throttle
GROUND SPEED CONTROL Manual "Speed Boss" Ground Speed Control System maintains accurate and consistent speed on all terrain.
BRAKES Hydraulic drum brakes on rear wheels, Hand lever actuated parking brake.
PARK BRAKE Hand lever actuated parking brake.
STEERING Hydraulic power steering with orbital motor. Automotive 15 in (38 cm) steering wheel with tilt adjustment. 19 ft (5.8 m) Outside turning circle.
TIRES Front: 20 x 1000 x 10 Multi Rib 4 ply turf Rear: 24 x 13.00 x 12 Multi Trac 4 ply turf
FLUID CAPACITIES Fuel Capacity: 5 Gallon (19 l.)
INSTRUMENTATION Hour meter, Speedometer
SAFETY & CONFORMANCE Start switch on clutch pedal Complies with all applicable ANSI, OSHA, and, (optionally) European Machinery Directive standards
SEAT Adjustable position deluxe seat with 1/2 back support.
BATTERY Automotive type 24F, 12 volt, 900 CCA minimum
CONSTRUCTION Heavy duty hydraulically formed tubular steel frame with formed steel body panels
SUSPENSION Front: Cantilever type Rear: Tires
DIMENSIONS Length: 112 in (285 cm) - Width: 61 in (155 cm) - Height: 50 in (127 cm); Wheelbase: 60 in (152 cm) - Width with booms open 230 in (584 cm) - Height with booms up 126 in (320 cm)
WEIGHT 1,200 lbs (544 kg) dry; 2,500 lbs (1,136 kg) loaded
SPRAY COMPONENT (Specifications common to all models)
SPRAY PERFORMANCE Application Rates: 20-220 Gallons Per Acre 0.5-5 Gallon Per 1,000 Sq. Ft. 180-2050 Liters Per Hectare
Production Rate: 6.4 Acres/Hour @ 3.5 MPH Up to 75 acres per day
TANK 160 Gallon (605 liter) Polyethylene: low profile configuration: lifetime guaranty; 16 inch (41 cm) diameter fill well with nylon strainer basket, hinged cover
FILTRATION Downstream spray system protected by nylon reinforced 50 mesh stainless steel strainer
AGITATION Smithco "Quadra-Jet" agitator with four venturi volume boosters
ENGAGE/DISENGAGE Electromagnetic clutch with toggle switch at operator position
PUMP 10-70 gallons per minute (38-265 lpm) 10-80 psi (0.7-7 bar) High volume centrifugal type with silicon-carbide seal All stainless steel body, shaft and plugs Built in low pressure warning horn to alert operator to low spray liquid level Built in automatic air bleed system for self re-priming during operation with low liquid levels Belt drive from prime mover engine
PERFORMANCE Spray performance:
  • Application rates: 20-220 gallons per acre
  • 0.5-5 gallon per 1,000 sq. Ft.
  • 180-2050 liters per hectare
  • Production rate 6.4 acres/hour @ 3.5 mph (5.6 kph)
  • Up to 75 acres per day
SPRAYER CONTROL
Model 1604 Raven 203 Electric Controller; Master on/off Toggle Switch, 3 Individual Boom Control Toggle Switches, Spring loaded remote pressure adjustment switch to control motorized butterfly valve, Oil-Filled Pressure Gauge,
Model 1602 Raven SCS 440 Based Electronic Spray Control System
  • Precise delivery of pre-selected application rate
  • Boom Control (Individual sections)
  • Record of material applied and area covered
Model 1610 Manual type, 3 section ABS ball valve turns individual boom sections on/off, agitation on/off Manual Screw type Pressure Adjustment, with pressure gauge
BOOMS 14-100 20 FT. (6 meters) Dry steel boom with 12 nozzles. Manual operation. Folds behind for transport and storage. Hinges brake away and return to position automatically
15-493 18.5 (5.5 meters) stainless steel boom with 11 nozzles. Electric operation. Folds vertically and forward for transport. Hinges brake away and return to position automatically
15-577 18.5 (5.5 meters) stainless steel boom with 11 nozzles. Manual operation. Folds vertically and forward for transport. Hinges brake away and return to position automatically
10-300 18.5 (5.5 meters) stainless steel boom with 9 nozzles. Electric operation with Ground Following Contour Wheels. Folds vertically and forward for transport. Hinges brake away and return to position automatically
15-571 SMITHCO Star Shield Covered Boom System
OPTIONS & ACCESSORIES 14-285 Foam Marker: Electric Operation, Manual Control
16-129 or 16-909 Hose Reel: 200 ft. (61 m.) Capacity, Manual or electric rewind (Requires 14-311 Mounting Kit)
15-363 Clear Water Wash Tank
10-366 Chemical Cleanload Safe Fill System (1602 and 1604 ONLY)

 

10-366 Smithco “Safe-Fill System”

The Smithco Safe Fill System is a self-contained eduction system that allows the operator to mix liquid and dry chemicals safely and quickly.

  • 316 Stainless steel venturi provides highest eduction rate and durability against all chemicals.

  • Safety - All crop protection chemistry is mixed at ground level. Cleanload eliminates the need for operators to climb on and around machines while handling expensive and dangerous chemicals. Operator exposure to slips, trips, and falls is reduced. Chemical spill potential is reduced, minimizing operator and environmental exposure.

  • Optional suction lance allows the operator to educt bulk liquid and dry chemicals (wettable powders, dry flowables and water-dispersible granules) from large containers without secondary handling.

  • Robust tank and bottle rinse nozzles designed to wash Cleanload hopper and triple rinse chemical containers of residue.