SWEEPSTAR 48
Sweeper Specifications

Download PDF Spec Sheet
the Colours of Autumn leaves in a park
Models 48-500AB Sweep Star 48H Brush Reel
48-500AF Sweep Star 48H Finger Reel
Power 18 hp (13 kW) twin-cylinder, OHV, air-cooled gasoline engine with double action air intake filtration. (Engine mounted
plus remote cyclonic filtration system).
Configuration Self contained, three-wheel, tri-cycle configuration with front steering, two rear drive wheels and rear mounted high lift debris hopper.
Debris Hopper Capacity – 1.75 cubic yards (1.3 cu m)
Construction – 14 gauge steel formed panels
High capacity airflow openings at top and rear
Dump -Hydraulic raise / lower debris hopper to dump height to 6’4″ (1.9m) above the ground to dump debris into refuse
container.
Sweeper Heads 48″ (122 cm) wide; belt-driven single rotating reel; adjustable sweeping height; follows terrain on dual caster wheel.
Choice of Rubber finger sweep reel with 96 flexible fingers (Model CF)
— or — Nylon bristle brush sweep reel (Model CB)
Drive Hydrostatic variable speed pump. Direct coupling to engine. Drives to two, rear mounted Parker heavy duty / high
efficiency hydraulic drive motors on rear wheels. Single hydraulic traction pedal for forward and reverse drive
Speed Infinitely variable
Forward 0-10 mph (0-16 kph)
Reverse 0-3 mph (0-5 kph)
Braking Dynamic braking through the hydraulic drive system; Manually operated disc type parking brake on rear wheels
Battery Automotive Type 24F, 12-volt (battery not included with ocean or air shipment)
Construction Hydraulically formed, electrically welded heavy wall steel tubing.
Tires & Wheels Front: (1) 18-9.50 x 8 Multi-ribs
Rear: (2)23-1050×12 Soft-trac
Casters (2) 9 x 3.5 x 4
Steering Manual chain drive with 9.3:1 reduction, 15 in (38cm) diameter, soft grip automotive type steering wheel.
Instrumentation Hydraulic levers to lift/lower debris hopper, open/close debris hopper tailgate and raise/lower of sweeping mechanism
head assembly. Hour meter.
Controls Single hydraulic traction pedal for forward and reverse
Hand operated throttle control
Seat High-back, single-piece construction. Adjustable operator position
Electrical 12-volt, electronic key start
Sound Level 90 dbA
Dimensions 121 in (307 cm) – 66 in (168 cm) – 84 in (213 cm)
Wheel Base 70 in (179 cm
Weight 1900 lbs. (862 kg)
Liquid Capacities Hydraulic system oil: 5 gallons (19 liter) in high density polyethylene tank.
Gasoline (unleaded): 6 gallons (22.7 liter) in high density nylon low-perm tank
Safety ROPS with operator seat belt Battery located outside of engine, hydraulic compartment. Fire proof fuel lines, hydraulic lines covered with abrasion and leak resistant tube. Fire extinguisher. Operator presence switch in seat for engine start. Complies with all applicable ANSI, OSHA and European Machinery DIrective standards.
Options 48-501 Hopper Dust Shield
48-502 48H Nylon Brush Head , 4 rows of 5″ bristles
48-503 48H Rubber Finger Reel, 96 Flexible Rubber Fingers

QUESTIONS? Call us: 1-877-833-7648

Contact Us