SWEEPSTAR 48
Sweeper Specifications
| Models | 48-500AB Sweep Star 48H Brush Reel 48-500AF Sweep Star 48H Finger Reel |
| Power | 18 hp (13 kW) twin-cylinder, OHV, air-cooled gasoline engine with double action air intake filtration. (Engine mounted plus remote cyclonic filtration system). |
| Configuration | Self contained, three-wheel, tri-cycle configuration with front steering, two rear drive wheels and rear mounted high lift debris hopper. |
| Debris Hopper | Capacity – 1.75 cubic yards (1.3 cu m) Construction – 14 gauge steel formed panels High capacity airflow openings at top and rear Dump -Hydraulic raise / lower debris hopper to dump height to 6’4″ (1.9m) above the ground to dump debris into refuse container. |
| Sweeper Heads | 48″ (122 cm) wide; belt-driven single rotating reel; adjustable sweeping height; follows terrain on dual caster wheel. Choice of Rubber finger sweep reel with 96 flexible fingers (Model CF) — or — Nylon bristle brush sweep reel (Model CB) |
| Drive | Hydrostatic variable speed pump. Direct coupling to engine. Drives to two, rear mounted Parker heavy duty / high efficiency hydraulic drive motors on rear wheels. Single hydraulic traction pedal for forward and reverse drive |
| Speed | Infinitely variable Forward 0-10 mph (0-16 kph) Reverse 0-3 mph (0-5 kph) |
| Braking | Dynamic braking through the hydraulic drive system; Manually operated disc type parking brake on rear wheels |
| Battery | Automotive Type 24F, 12-volt (battery not included with ocean or air shipment) |
| Construction | Hydraulically formed, electrically welded heavy wall steel tubing. |
| Tires & Wheels | Front: (1) 18-9.50 x 8 Multi-ribs Rear: (2)23-1050×12 Soft-trac Casters (2) 9 x 3.5 x 4 |
| Steering | Manual chain drive with 9.3:1 reduction, 15 in (38cm) diameter, soft grip automotive type steering wheel. |
| Instrumentation | Hydraulic levers to lift/lower debris hopper, open/close debris hopper tailgate and raise/lower of sweeping mechanism head assembly. Hour meter. |
| Controls | Single hydraulic traction pedal for forward and reverse Hand operated throttle control |
| Seat | High-back, single-piece construction. Adjustable operator position |
| Electrical | 12-volt, electronic key start |
| Sound Level | 90 dbA |
| Dimensions | 121 in (307 cm) – 66 in (168 cm) – 84 in (213 cm) Wheel Base 70 in (179 cm |
| Weight | 1900 lbs. (862 kg) |
| Liquid Capacities | Hydraulic system oil: 5 gallons (19 liter) in high density polyethylene tank. Gasoline (unleaded): 6 gallons (22.7 liter) in high density nylon low-perm tank |
| Safety | ROPS with operator seat belt Battery located outside of engine, hydraulic compartment. Fire proof fuel lines, hydraulic lines covered with abrasion and leak resistant tube. Fire extinguisher. Operator presence switch in seat for engine start. Complies with all applicable ANSI, OSHA and European Machinery DIrective standards. |
| Options | 48-501 Hopper Dust Shield 48-502 48H Nylon Brush Head , 4 rows of 5″ bristles 48-503 48H Rubber Finger Reel, 96 Flexible Rubber Fingers |